12V 1CH 433Mhz 164ft (1relays) DC RF Wireless Relay Module Remote Control Momentary Switch Transmitter and Receiver

DC 12V 1CH RF Wireless Relay Module Remote Control Momentary Switch 433Mhz Transmitter and Receiver for Entrance Control, Car Light 164ft (1relays)

12V 1CH 433Mhz 164ft (1relays) DC RF Wireless Relay Module Remote Control Momentary Switch Transmitter and Receiver

The receiver is small in size, stable and reliable, and the distance can reach 50m in open places. It has strong receiving ability. QIACHIP provides high signal sensitivity and anti-interference ability. Note that if the distance of the remote control does not meet the distance requirements, please replace the battery The distance of the remote control will be affected by the environment, which will affect the reception and transmission of the signal. You can try to pull the antenna of the receiver to extend the receiving distance of the remote control. The reception is flexible and stable, but please do not change the reception. The receiver or remote control is placed in a metal shell or close to any metal object, which directly affects the signal reception, Suitable for electric lights, motors, wireless security alarms, wireless access control, wireless controllers and other industrial control and security fields, reliable control, high receiving sensitivity, strong confidentiality, easy to set up and use, wireless control The receiver only uses the same code as the remote control transmitter. Several transmitters can control several receivers to achieve independent control without interfering with each other. Warm reminder: Only the remote control type with the EV1527 learning code is accepted. It can provide high signal sensitivity and anti-interference ability, stable reception, better signal, more stable performance, and the factory default does not interfere with each other. The remote control distance is about 100 feet through the wall without direction. It can pass through walls, floors and doors to control the receiver anywhere within a reliable distance. It can be used in industrial control and security fields, such as lights, motors, remote controls, wireless security alarms, wireless access alarms, wireless controllers, etc. Step 1: Programming (Customer Self-Operation) First, program the switch by yourself, supporting 4 working modes: momentary, toggle, latching, delay (set via the receivers learning button). Step 2: Working Principle After programming, press the 433MHz RF remote to send a coded signal; the receiver decodes the signal and drives the relay to switch the dry contact state (on/off), realizing remote control of external circuits. Step 3: Dry Contact Terminals (Passive, No Voltage) - COM: Common terminal (core connection end) - NO: Normally Open (connected to COM when remote pressed) - NC: Normally Closed (disconnected from COM when remote pressed) Step 4: Standard Forward Wiring Connect your load to COM + NO (remote press = circuit on, realizing normal control of lights, door openers, motors, etc.). Key Note Input voltage: Only DC 12V. Output is passive (no voltage); provide a power supply matching the loads working voltage and wire to form a complete loop. [Introduction]press and hold the remote control button (such as A), the corresponding relay on the receiver is turned on; release the remote control button (such as A), and the corresponding relay on the receiver will turn off. Setup [Introduction]press the remote control button (such as A) to turn on the corresponding relay on the receiver; press the remote control button (such as A) again to turn off the corresponding relay on the receiver. Setup [Introduction]press the remote control button (such as A), the receiver relay corresponding is turned on; press the remote control button (such as B), the relay on the receiver corresponding is turned off. Setup [Introduction]Press and hold on button , relay will turn on; Release this button, relay will turn off after 5 seconds ( or 10/15/20 seconds) Setup

Brand: RODOT

improvement, receiver, momentary switch, switch 433mhz, 433mhz, building supplies, momentary, transmitter receiver, building, relay module, car light, 12v Tools & Home Improvement Building Supplies Building Materials Doors Garage Doors, Openers & Parts

Key Features

• 164ft/50m Long RangeThe volume is small and the performance is stable and reliable, high receive sensitivity, Signal can pass through walls, floors and doors. Max range is up to 164ft/50m with no obstacle.
• Wide ApplicationApplication for industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc.
• Flexible ControlReliable control,the receiver only works with the transmitter which use same code. One/several transmitters can control one/several receivers simultaneously, allowing independent control without mutual interference. Warm Tip :Support remote type: EV1527 learning code.
• Easy to Install & StableWireless control, easy to setup and use, Stable and reliable performance, high receive sensitivity, high confidentiality.
• Package IncludesComes with 2 Pcs 1 button Transmitter and 1 Pcs 1CH receiver. NOTE: Please email us if you meet any problem, we are always here to help, thanks!
• Input: DC 12V only

Product Details

• Wattage: 10 watts

Shipping & Guarantees

• FREE standard shipping within the United States (3 6 business days)
• 100% money-back guarantee for lost or damaged items
• Secure checkout with encrypted payment processing
• Shipping via UPS, FedEx, and USPS
• Ships to lower 48 states only (no PO Boxes / APO / FPO)

Returns

• 30-day hassle-free returns
• Items must be unused and in original packaging
• Full refund if item is not delivered
• Guaranteed delivery within 6 7 business days

Payment Methods

Credit Cards, PayPal, Shop Pay, Apple Pay, Google Pay, Amazon Pay, Meta Pay

Customer Support

Questions? Contact us at Support@GiftAbay.com
We respond within 24 hours on business days.