300pcs Replacement Steel Needles for Flooring Wall Tile Leveling System, 1/16" 1.5mm Reusable Spare Steel Pin Tiling

300pcs 1/16" Replacement Steel Needles for Flooring Wall Tile Leveling System, 1.5mm Leveler Replaceable Pin Reusable Spare Steel Pin Tiling Construction Tools (t300, silver)

300pcs Replacement Steel Needles for Flooring Wall Tile Leveling System, 1/16" 1.5mm Reusable Spare Steel Pin Tiling

This professional quality tile leveling set increases the efficiency of laying tiles. The tile leveling system ensures flatness between tiles avoiding inequalities. Moreover, Tile Leveling System 300pcs replaceable T-shaped tile needles for long-term use. A tile leveling system is an excellent tool for tile floor or wall tile construction. Features of tile leveling system kit: 1. Ensure the tile balance on the same horizontal position. 2. Prevent tiles from moving while curing. 3. Increase the speed of tile laying and reduce fatigue and pressure. 4. Steel needles can be replaced ,which extend the service life of tile leveling system kit and economical for you. Specifications: Color: silver Material: stainless steel Size: 1.26 inch (32 mm) in length, 1/16 inch (1.5 mm) in thickness Package includes: 300pcs T-pins steel needles Features: Easy to use in DIY operation:The T-pins steel needles for flooring are reusable, durable, wearresistant and nice for DIY operations, which also can be easily fixed or removed by wrench. Use tips: 1. Close to tile, insert T-pins along the gap between tiles; 2. Then rotate 180 degrees and the T needle is stuck at the bottom of the two tiles; 3. Adjust the lid with a hand or a special wrench until the two tiles are on the same level; 4. After leveling, 4-6 hours, before the cement/binder is completely dry, rotate the lid in reverse and take out the 180 degree T needle until the word is removed. 1. Tile gap should be kept between 1/12"(2mm) -1/4"(6mm) when tiles are laid, which can be used in conjunction with the cross to make the tiles evenly separated. 2. Insert the T-shaped steel needle along the tile gap. 3. Rotate 90 degrees clockwise to make the t-shaped steel pin stuck between the two tiles. 4. The wrench rotation cover until the two tiles are at the same level. 5. Rotate it 90 to remove the T pin and before the cement is dry (usually not more than 6 hours). 6. Clean and dry storage for reuse. Note: 1.Moving the T-shaped needle back and forth before tightening up is highly suggested so that the tile leveling system can be more easily taken out. 2.Small items, please keep away from kids.The colors may exist slight difference due to different screens.Please allow slight size errors due to manual measurement.

Key Features

• ✅ Apply To: the Replaceable Steel T-pins Needles Kit Fits Well for Flooring Wall Replacement Tile Leveling System; the Tile Leveling System Ensures Flatness Between Tiles Avoiding Movements During the Mortar Setting.
• ✅ Quality Material: the 300pcs Tile Steel Needle is Made of Stainless Steel, Which is Strong and Durable, with Good Wear Resistance, Impact Resistance, Pressure Resistance and Abrasion Resistance, and Can Serve You for a Long Time.
• ✅ Size: Each Replacement T-pins Steel Needle Measures about 32mm/ 1.26 inch in Length, Thickness is About 1/16 Inch/ 1.5 mm, the Right Size is Suitable for Tile Space Between 2 to 6 mm, and is Suitable for Tile Laying from 0.12" / 3 mm to 0.63" / 16 mm Thickness, Keeping the Tiles in the Same Horizontal Position and Preventing Them from Moving During the Setting Process.
• ✅ Installation Steps: Replaceable Tile Steel T-pin Tool is Easy to Use, Only Need to Remove the Nut Cover, Insert the T-pin Steel Needle into the Groove, Put the Red Cover into the Groove, and Tighten the Nut Cover, Please See Pic for Details.remove the T-type Straightener About 5-6 Hours After Leveling Before the Tile Binder or Cement is Completly Dried; It Will Increase Tile Installation Speed and Be More Cost Effective.
• ✅ This Tile Installation Tools Not Only Improves the Efficiency of the DIY and Tile Laying Process, but Also Provides You with a Perfect Tile Surface. After Having It, Reduce the Fatigue/pressure of Installers. Increase Tile Installation Speed and Be More Cost Effective.balance Tiles in the Same Horizontal Position.

✅ Product Dimensions: 3.7 x 3.7 x 1.1 inches

✅ Color: Tile Steel Needle

Shipping & Guarantees

• ✅ FREE standard shipping within the United States (3 6 business days)
• ✅ 100% money-back guarantee for lost or damaged items
• ✅ Secure checkout with encrypted payment processing
• ✅ Shipping via UPS, FedEx, and USPS
• ✅ Ships to lower 48 states only (no PO Boxes / APO / FPO)

Returns

• ✅ 30-day hassle-free returns
• ✅ Items must be unused and in original packaging
• ✅ Full refund if item is not delivered
• ✅ Guaranteed delivery within 6 7 business days

Payment Methods

✅ Credit Cards, PayPal, Shop Pay, Apple Pay, Google Pay, Amazon Pay, Meta Pay

Customer Support

✅ Questions? Contact us at Support@GiftAbay.com
We respond within 24 hours on business days.