DC 12V All Purpose Digital Temperature Controller Thermostat with Sensor, Programmable Dual Color LED Display

DC 12V All Purpose Digital Temperature Controller Thermostat with Sensor Programmable Dual Color LED Display Monitor

DC 12V All Purpose Digital Temperature Controller Thermostat with Sensor, Programmable Dual Color LED Display

After connecting to the power supply and load (refer to the wiring diagram), you can supply power to the controller, the red color manifest to measure the temperature, the following color blue (or red) as required to set the temperature In case the actual temperature shows and please press the set button, the following digital setting text will flash and temperature, after completing the setting, wait for 3 which will automatically return, at this point the controller will automatically disconnect the relay according to the preset temperature, this sensor can meet all kinds of high power load, make sure the line is correct The status description of the light and digital tube: Indicator: off means the relay is disconnected and the normal light on shows that the relay has closed. Digital tube: LLL sign is the sensor open circuit, and HHH sign means beyond the measuring range, the controller will forcibly disconnect the relay, the --- sign means high temperature protection Connect power and load to supply power to the controller. At this time, the upper red display shows the measured temperature and the lower blue (or red) display shows the desired set temperature. Press STC (+) C / F (+) to set the required setting temperature, wait 3 seconds after the setting is completed and automatically confirm the return. At this point, the controller will automatically turn the relay on and off according to the setting. The thermostat output is 10 relays, which can meet the requirements of high power loads. Connection is correct. The Description of Parameters Function: Please press the button SET five seconds and then it can enter to the main menu of setting, pressing STC(+)and C/F (-) can switch to P0-P8. About the adjustment of parameters P0-P8, when you need to adjust P0, firstly please press STC (+) and C / F (-) at the same time, and the P0figurewill flash, secondly please press STC (+)and C / F (-) to adjust, if done, finally please press STC (+) and C / F (-) to confirm at the same time,P1-P8 which can be set the parameters of each code like P0according to the needs of their own. The key C/F is a key for switching Fahrenheit or Celsius Press the key C/F once, and it will manifest F(Fahrenheit mode),and then press the key C/F once, it will show C(Celsius mode), the default mode is C(Celsius mode),if there is a big temperature error when you use it, maybe it is F mode. An example for setting: If you need to Control the refrigeration equipment If you need to check the heating equipment: 1: Please set to H mode in code P0. 2: In case the actual temperature appears, you need to press the SET key, and the following digital setting text will flash, then press C / F (+) and SET (-) to set the heating stop temperature, after setting please wait 3 seconds, it will automatically confirm to return. 3: Return difference setting: firstly please press the SET key for five seconds all the time, and it will enter the main setting menu, secondly press STC (+) and C / F (-) to switch at P1, when switching to P1, press STC (+) and C / f (-) one time, the P1 digit will flash, then press STC (+) and C / f (-) to set the difference value (return difference means you need to add several degrees to start, for example, if it stops when the stop setting temperature is 25 degrees, you need to set the heating temperature to 22 degrees, the value in the P1 code should be set to 3 degrees, then the return difference value is 3 degrees), after finishing it, press STC (+) C / F (-) simultaneously to confirm. 4: When all the above steps have been set, the data is automatically saved, so to control the heating equipment, it will start the heating system at minus 22 degrees and stop heating when the temperature is 25 degrees. Hilitand is a registered brand of industrial and household products. "Insist on top quality and service", we operate our business with this brand concept. Listen to customer needs, use the best quality materials to produce products under the most stringent procedures, and provide customers with the most sincere service attitude, and adhere to the most intimate after-sales service. Visit the Store Visit the Store Visit the Store Visit the Store The company was established in 2011. All departments and positions of the company operate in strict and orderly manner in accordance with the corresponding system, and strictly control quality from product development, production, pre-sales / after-sales service and other links. Sales categories involve wooden furniture industry, hardware furniture industry, clock and watch industry, glasses industry, molds, knives, etc., in North America, South America, Europe, Africa, Asia, etc. It has many customers and has won unanimous praise from customers. Our company focuses on all-round development, attracts and cultivates outstanding employees with a good working environment, creates a healthy and civilized corporate culture, emphasizes equality and fair competition. Pursuing excellent company and employees to produce excellent products, excellent products satisfy every customer, and outstanding achievements come from the meticulousness of every link. We combine high-quality products, innovative technology and high-quality after-sales service, hoping to provide services and create value for more users in the future. Visit the Store

Key Features

• ✅ TWO TYPES: This delicate digital display temperature controller can set Celsius mode or Fahrenheit mode
• ✅ CONVENIENT: The display and control temperature can be set to 0.1?. It is convenient to install and wiring is simple
• ✅ HIGH TEMPERATURE : Wide temperature measurement range from -50? to 110? and supports high temperature
• ✅ EASY TO INSTALL: This digital temperature controller can be installed directly or embedded in industrial control equipment panel, convenient and quick
• ✅ WIDELY USED: Widely used in the hatching area, equipment case, air conditioning system, temperature control and other fields

Shipping & Guarantees

• ✅ FREE standard shipping within the United States (3–6 business days)
• ✅ 100% money-back guarantee for lost or damaged items
• ✅ Secure checkout with encrypted payment processing
• ✅ Shipping via UPS, FedEx, and USPS
• ✅ Ships to lower 48 states only (no PO Boxes / APO / FPO)

Returns

• ✅ 30-day hassle-free returns
• ✅ Items must be unused and in original packaging
• ✅ Full refund if item is not delivered
• ✅ Guaranteed delivery within 6–7 business days

Payment Methods

✅ Credit Cards, PayPal, Shop Pay, Apple Pay, Google Pay, Amazon Pay, Meta Pay

Customer Support

✅ Questions? Contact us at Support@GiftAbay.com
We respond within 24 hours on business days.