LLPT Double Sided Tape - Acrylic Waterproof Permanent Mounting Tape 0.4 Inch x 108 Ft for Nail Box Home Deco

LLPT Double Sided Tape Acrylic Waterproof Permanent Mounting Tape 0.4 Inch x 108 Ft Total for Nail Box Home Deco and LED Strips Lights (AC0400)

LLPT Double Sided Tape - Acrylic Waterproof Permanent Mounting Tape 0.4 Inch x 108 Ft for Nail Box Home Deco

LLPT 2 sided acrylic mounting tape works extremely well on smooth surfaces and widely used for LED strip lights, trims, car registration plates, name plates, address plaques, signs, emblem, car holders, mosquito/bug screen, metal mailbox, fake nails, project photo walls, crafts, mirrors, hangers, tooth brush holder, photo frames, power strip and other automotive home office decorations. LLPT double sided flexible mounting tape is an industrial grade Acrylic foam tape, more stable and moderate initial adhesion which is good for permanent and reliable installation indoor and outdoor, particularly applications where extreme weather, moisture and adhesive is needed. The longer applied the stronger the adhesive will be! LLPT acrylic mounting tape has sticky strength that can withstand moderate to heavy mounting with peel adhesion up to 17lb/in and tensile strength up to 85 lb/square inch as tested on stainless steel. Holding weight is based on objects with a maximum depth of 0.75”. WARM THE ADHESIVE SIDE UP IN COLD WEATHER BY HAIR DRYER FOR BETTER INITIAL BONDING. 1. Make sure the application temperature is around between 70° and 100°F, no wrinkle and tape lays down flat. 2. Avoid contamination and finger touch to the adhesive. 3. Press the tape against the object and wall as hard as you can. 4. Use hand or a plastic roller to clean the air out between object and adhesive by hard press against to tape. 5. Heavy textured surfaces will leave too much air and cause weak bonding strength. 6. Always apply the tape vertically on objects and make a “X” mount as well to maximize the holding strength if the object is over size and weight. 7. Never use this tape on any type of painted wall or it will damage your painting. The surfaces should be thoroughly cleaned with a 50:50 mixture of isopropyl alcohol and water. Ideal tape application is between 70° and 100°F (21° and 38°C) and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended. 1. Clean the surface as per application guidelines and keep it dry. 2. Pinch and stretch a corner of the adhesive until the backing liner lifts from the tape for easier liner removal; LLPT has upgraded backing with white oil paper, easy to peel and install. 3. Cut the right size you want and stick it on the surface of object, if you are going to mount over size and heavy object, let the tape cure for at least 12 hours to create a secure bonding first and then stick to the wall. 4. Give a HARD PRESS if you are sure about the position to objects and wall. 5. For some surface if the tape does not work, spray Adhesion Promoter first then stick the tape. Short Term: (minutes, hours) 300°F (149°C) Long Term: (days, weeks) 250°F (121°C) Easily handling the heat in car at sumer season, working under direct sun and performing the same bonding strength under high watts LED strip lights. Excellent water and moisture resistance once the curing process is done, which taken 24 hours. BUT DO NOT stick the tape onto any wet and oil surfaces for initial application, these environmental conditions affect the bonding strength or even weaken the performance; always CLEAN & DRY surfaces first. Peel Adhesion: 17 lb./in. width (350 N/100 mm) based on stainless steel. Normal Tensile: 85 lb./in.2 (620 kPa) based on aluminum T-block. Dynamic Shear: 85 lb./in.2 (620 kPa) based on stainless steel. Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store LLPT provide an unparalleled selection of tape products, all backed by rigorous quality control and a drive for continuous improvement to meet your exact requirements. Wide Range: Carpet Tape, Gaffer Tape, Butyl Tape, Foil Tape, Double Sided & Foam Tape, Magnetic Tape, Masking Tape, Woodworking Tape, Textile Tapes (Iron & Sew On), Reflective Tape, Grip Tape, Patch Seal Tape, Wiring Harness Tape, Drywall Tape and more in LLPT brand store page.

Key Features

• ✅ APPLICATION: Strong bonding withstands moderate strength on smooth surfaces; safe for glass, metal, marble, tiles, trims, moldings on Automotive, car registration plates, name plates, address plaques, signs, car holders, refitting vehicle for body kit/front bumper/rear bumper/side skirt, home appliance panel repair, screen, metal mailbox, mirrors, hangers, holds servo, ESC, receivers, electronics on car, drones, quadcopters, crafts, fake nails, photo walls and so on.
• ✅ CONSTRUCTION: Avoid FINGERPRINTS on adhesive layer for strongger bonding. Premium grade mounting tape that is rated to hold 5-20 pounds of mass weight per square inch with double-sided adhesion; weather-proof adhesive empowers home and enterprise owner to have tight bonding; wall safe adhesive enables apartment renters, students, homeowners, teachers and office workers to temporarily post various objects on walls & crystal clear acrylic tape resists yellowing & UV exposures.
• ✅ ROLL SIZE: There are 4 sizes; 0.24, 0.4, 0.6 and 0.8 inch means the width of tape, 108 feet means (each roll is 36 feet) the total length, a much bigger roll than standard. Thinner version is good for project photo walls, nail beauty, crafts, chunlian, card teaching and so on for industrial use, for large mounting we recommand you to choose the wider versions or other LLPT tapes.
• ✅ FEATURES: The adhesive (rated to hold 5-20 lbs per square inch after 24 hrs) is designed to resist curling, making installation process fast and easy. It resists extreme temperature, moisture, humidity, UV, etc, and anti-dust. No objectionable odor and nontoxic, tasteless, environment protection and no discoloration. It comes at true 108 feet in total length per roll, affordable and very competitive at the fraction of cost compared to most brands on Amazon based on sizes and quality.
• ✅ INSTALLATION: Clean and dry surface firs. Acrylic double sided mounting tape is for permanent solution, but its initial adhesion is not strong and specially on rough or textured surfaces; LLPT suggests using ADHESION PROMOTER to increase the initial bonding strength, search ASIN: B098747W2K for LLPT 94 ADHESION PROMOTER or other brands will also work with LLPT Acrylic Tapes.
• ✅ PRETREATMENT GUIDELINES: For maximum bond strength, the surfaces should be thoroughly cleaned with a 50:50 mixture of isopropyl alcohol and water. Ideal tape application is accomplished when temperature is between 70° and 100°F (21° and 38°C) and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended.

✅ Product Dimensions: 0.4"W x 0.03"Th

✅ Color: Clear

Shipping & Guarantees

• ✅ FREE standard shipping within the United States (3–6 business days)
• ✅ 100% money-back guarantee for lost or damaged items
• ✅ Secure checkout with encrypted payment processing
• ✅ Shipping via UPS, FedEx, and USPS
• ✅ Ships to lower 48 states only (no PO Boxes / APO / FPO)

Returns

• ✅ 30-day hassle-free returns
• ✅ Items must be unused and in original packaging
• ✅ Full refund if item is not delivered
• ✅ Guaranteed delivery within 6–7 business days

Payment Methods

✅ Credit Cards, PayPal, Shop Pay, Apple Pay, Google Pay, Amazon Pay, Meta Pay

Customer Support

✅ Questions? Contact us at Support@GiftAbay.com
We respond within 24 hours on business days.