Taigeguang Socket,E26 E27 Bulb (3 Pack) Motion Sensor Light PIR Motion Screw Adapter Indoor Use Only, Auto On Off Night

Motion Sensor Light Socket,E26 E27 PIR Motion Screw Bulb Adapter Indoor Use Only, Auto On Off Night Light Control for Garage Basement Porch Storage Room (3 Pack)

Taigeguang Socket,E26 E27 Bulb (3 Pack) Motion Sensor Light PIR Motion Screw Adapter Indoor Use Only, Auto On Off Night

Specifications: Power Source: 100-240V/AC Rated Load:<60W Max. Detection Distance: 6m max Time-Delay: Min.10sec3sec Max. 5min1min (adjustable) Ambient Light: 3-2000 LUX (adjustable) Question: Will the motion activated light sockets work in an enclosed lampshade ? Answer: The motion activated light sockets can only work in an open lampshade and facing down. Or the glass shade will block the sensor. Question: What's the maximum voltage, can it work with 230V ? Answer: The motion sensor light sockets can work via AC100V-240V. Question: Can I use this motion sensor light socket outdoor? Answer: The motion sensor light socket can't penetrate the glass and walls to detect. Please do not fix the socket into an enclosed lampshade or the glass-shadewill block the sensor. Can use indoor only. Question: What is the Sensor Range of this motion sensor light socket? Answer: This motion sensor light socket offers 360-degree motion detection andhas a sensitivity range of up to 12 feet when mounted 8 feet above the floor. ThePIR motion light will light up automatically while the motion sensor detect motion in the detective range in the dark. Question: What Bulb can work with? Answer: The motion sensor light sockets is suitable for all E26/E27 Light Bulb(Max Wattage<60W), such as LED lamp,Incandscent light,Halogon light, energy-saving lamps and so on. NOTES: 1) Can use it indoors only. 2) The motion sensor light adapter should be installed downward and no higher than 10 feet, or the sensor will not work right.It cant be installed horizontally or facing upward. 3) No cover the Motion Sensor Ball 4) Please do not fix the socket into an enclosed lampshade, or the glass shade will block the sensor. 5) Max load 60W. Not suitable for the LED garage light60w. No work with heat lamp bulbs. 6) Please make sure the motion sensor is facing the desired motion area with proper distance and angle.If the room is too large, this socket may not suitable. 7) Make sure the 2 bulb spacing is more than 15ft. 8) When testing in daylight, please turn the LUX knob to the SUN position, otherwise, the sensor lamp would not work. 9) Its working temperature is -4F-104F, if the weather is too cold or too hot, the sensor may not work well, Please take care of this before buying!! 10) For safety: Ensure power is disconnected before installation to prevent electric shock. 11)To increase the bulb's sensitivity, please try to adjust the Angle and Height of the bulb installation, and make the sensor toward the direction people are coming. 12) When installed it in the lampshade, pay attention to whether the size of the lamp body is suitable for the lampshade,the lampshade may effect the sensitive of the socket. Stairs/ Front door Lighting Corridor/Aisle Lighting Garage Lighting Basement/Storage room Lighting Troubleshooting Guide 1. Light does not turn on at all: Check Power: Ensure the wall switch controlling the light socket is turned on. Check Bulb: Please confirm you are using a compatible bulb. This socket is suitable for most E26/E27 screw-in bulbs, such as LED, CFL, or incandescent bulbs. However, the maximum wattage must be less than 60W, and it cannot be used with heating bulbs (like heat lamps). Check if the bulb is screwed in tightly, or if the filament is burnt out (indicated by a blackened tip). Check Mode Settings: Light Control (LUX): If the knob is turned to the "Moon" (crescent moon) mode, the light will not turn on during the daytime for testing. Please turn it to the "Sun" mode for the light to operate both day and night. After adjusting, please wait for the sensor to re-initialize (approx. 10-30 seconds). 2. Light stays on constantly (or triggers falsely): Check Installation Location: Is the sensor pointing directly at an air conditioning vent, a heater, or outdoor moving hot air currents? Interference from heat sources can cause false triggering. Check for Obstructions: Is the sensor window covered by dust, cobwebs, or stickers? Time Setting (TIME): Is the delay time for turning off the light set too long? 3. Shortened sensing distance / Insensitivity: Ambient Temperature Effect: When the room temperature in summer is close to human body temperature, the sensing distance naturally shortens or sensitivity decreases. This is a normal physical phenomenon. Lens Cleaning: Gently wipe the infrared lens surface with a soft cloth to remove any dust. 4.The bulb cannot be tightened securely Check the center contact spring (most common cause): If the bulb feels loose even when screwed all the way in, or if it turns on and off intermittently, unplug the bulb and use an insulated tool (such as plastic tweezers or a wooden toothpick) to gently pry the small contact spring in the center of the socket outward by 23 mm. Reinstall the bulb, keeping it vertical and screwing it in gently without applying excessive force. Some energy-saving or LED bulbs have a shorter metal base and may not fully engage with the threads inside the socket. Before purchasing, carefully check the socket size and replace with an E27/E26 bulb whose metal base is appropriately sized for the fixture. Always screw in the bulb by hand, stopping when slight resistance is felt. Do not use tools or overtighten, as this may damage the threads or internal wiring. If the bulb appears tilted,wobbles, or flickers after installation, stop using it immediately. Safety Warning: Before performing any wiring, disassembly, or bulb replacement, be sure to turn off the power to avoid electric shock.

Brand: Taigeguang

bulb adapter, auto, only, pack, electrical light, sensor light, pir motion, home, light, e27 pir, room, use only Tools & Home Improvement Electrical Light Sockets

Key Features

• ✓ 1) Motion Sensor Light Socket : The motion sensor does very well in detecting when someone is approaching. It has two adjustments. With Time Button adjustment can set the duration for which it will be 'on". With LUX Button can set the ambient light level below which it will turn on, so that it will not turn on if there is sufficient ambient light already.
• ✓ 2) Applicable Light Socket: This motion sensor light bulb socket is suitable for all E26/E27 screw on illuminates, it can convert your ordinary light bulb into an infrared sensor light. Maximum power is 60W and maximum voltage is 100v-240v .
• ✓ 3) Simple Controls and Great Flexibility: It utilizes the infrared energy from human as control-signal source,and it can an identify day and night automatically.
• ✓ 4) Wide Application: it can be used in Basement, Pantry Room, Storage Room, closet, stairs, corridors etc,suitable for various demands in your daily life.
• ✓ 5) TIPS:1) No Light Shade or Cover: The motion activated light sockets can only work in an open lampshade and facing down.So pls expose it outside.2) Must Fix Download: The motion sensor light adapter should be installed downward and no higher than 12 feet, or the sensor will not work right.3) The LUX button: if you adjust the LUX button to the maximum(the Sun),it can work in daylight and at night,but if you adjust LUX button to the minimum(Moon), it can only work at night.

Product Details

• ✓ Color: White
• ✓ Wattage: 60 watts
• ✓ Material Type: Plastic
• ✓ Included Components: NoWarningApplicable

Shipping & Guarantees

• ✓ FREE standard shipping within the United States (3-6 business days)
• ✓ 100% money-back guarantee for lost or damaged items
• ✓ Secure checkout with encrypted payment processing
• ✓ Shipping via UPS, FedEx, and USPS
• ✓ Ships to lower 48 states only (no PO Boxes / APO / FPO)

Returns

• ✓ 30-day hassle-free returns
• ✓ Items must be unused and in original packaging
• ✓ Full refund if item is not delivered
• ✓ Guaranteed delivery within 6-7 business days

Payment Methods

✓ Credit Cards, PayPal, Shop Pay, Apple Pay, Google Pay, Amazon Pay, Meta Pay

Customer Support

✓ Questions? Contact us at Support@GiftAbay.com
We respond within 24 hours on business days.